Solution 25952: Texas Instruments Computer Software Gives a "License Server is Currently Unavailable" Error.
... it to your network. Try to run the software again to see if the application runs successfully. If it still gives the same error, then there may be a TCP configuration issue on your computer that could cause this issue. To resolve this issue: • [Right-Click] the attached file “FixMTU.txt” and cho...https://education.ti.com/en/customer-support/knowledge-base/sofware-apps/computer-software-installation-activation/25952
Solution 29650: Solving Second Order Differential Equations Using the TI-Nspire™ CAS Family Products.
...ecting ". 2) Enter [y] ['] ['] [+] [2] [y] ['] [+] [y] [=] [x] [^] [2] [,] [x] [,] y] 3) Press [ENTER] to display the answer. The variables c1, c2, etc are constants. For example: Second Order Equation A ball is tossed straight up from an initial height of 0.29 meters and with an initial velo...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-family/product-usage/29650
Solution 26652: Troubleshooting TI-Nspire™ Navigator™ Wireless Cradles and Wireless Network Adapters Not Being Detected by TI-Network Manager.
...• Verify that the Wireless Cradles and Wireless Network Adapters are attached to the TI-Nspire Family handhelds. • Verify the Wireless Cradles are switched to the [ON] position using the lever located on the back. • Verify the TI-Nspire Navigator Access Point is setup correctly and has latest v...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-navigator/troubleshooting-messages-unexpected-results/26652
Solution 38116: TI-Innovator™ Hub Variation Between Temperature Probe Readings.
...iation between temperature probe readings? The readings from TI LM19 temperature sensor and the thermistor (both part of the breadboard pack) don’t match a reference reading from a Vernier temperature probe especially at higher temperatures (> 60 C)Please refer to the chart below:Please Note: Tem...https://education.ti.com/en/customer-support/knowledge-base/ti-innovator-technology/product-usage/38116
Solution 37818: What are the capabilities of the TI-Innovator™ Breadboard Pack?
...ponents, such as LEDs and sensors, that responds to TI-Innovator™ Hub commands. Passive components, such as resistors, capacitors, and manual switches that are not directly addressable by the TI-Innovator™ Hub but are required in many breadboard projects. Addressable Components Passive Com...https://education.ti.com/en/customer-support/knowledge-base/ti-innovator-technology/general-information/37818
Solution 38061: TI-Innovator™ Hub Analog Sensor Readings between IN1/OUT1, IN2/OUT2 3.3V and IN3/OUT3 5V ports are inconsistent.
...urce and IN3/OUT3 uses a 5V source. The same sensor may result in different reading depending on the port that it’s connected to.The Hub software (sketch) includes compensation to the known sensors but still has some variations (5-10%) which are not easy to compensate.Sensors connected via BB (br...https://education.ti.com/en/customer-support/knowledge-base/ti-innovator-technology/troubleshooting-messages-unexpected-results/38061
TI-84 Plus CE Online Calculator| Purchase |Texas Instruments
Purchase the online graphing calculator from TI. Discount pricing available for schools and districts — single and multiuser licenses. Get started today. TI-84 Plus CE Online Calculator| Purchase |Texas Instruments global website ...https://education.ti.com/en/products/online-calculators/ti-84ce-online-calc/where-to-buy
Solution 16269: Copying a TI-SmartView™ Emulator Software Script to Another Application.
... as graphics: • Open the appropriate script. • Select the keys to be copied. To select all the keys, click Edit >Select All. • Click Edit > Copy, switch to the other application, and paste the keys at the appropriate location. Note: Another possibility is to drag the selected keys to the new ap...https://education.ti.com/en/customer-support/knowledge-base/sofware-apps/product-usage/16269
Solution 31411: Resolving Internet Connection Loss After Configuring TI-Navigator™ Network Adapter and Removing TI-Navigator Network Adapter from Classroom Network.
...omputer. The Network Adapter you select in the TI-Navigator Network Manager is configured for sole use with the TI-Navigator System and cannot be switched easily to be used with normal internet connections so it is suggested to use the provided Belkin USB to Fast Ethernet Adapter if you use the ...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-navigator/troubleshooting-messages-unexpected-results/31411
Solution 35715: Review Workspace Not Displaying Responses and Student Panel Displays Blank in the TI-Nspire™ Navigator™ Teacher Software.
... Student Panel of the Review Workspace Toolbox. • And the Student Panel redraws when an action is taken in the software. The teacher: - Switches to another Workspace and comes back to Review Workspace and moves the mouse over the Student Panel. - Resizes the Student Panel. ...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-navigator/troubleshooting-messages-unexpected-results/35715
Solution 26651: Unable to Login to the TI-Nspire™ Navigator™ Class Session; Error Messages "Communication Failed", "Class Not Started", or "Could Not Login" Displayed
...nd corner. 2) Verify the TI-Nspire or TI-Nspire CAS handheld is securely connected to the TI-Nspire Navigator Wireless Cradle. Also, make sure the switch on the back of the TI-Nspire Navigator Wireless Cradle is set to "ON". For the error message Class not started (this message indicates that the...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-navigator/troubleshooting-messages-unexpected-results/26651
Solution 34071: Correcting Idle Message "Waiting for Response" When Using the TI-Nspire™ Family Navigator™ Teacher Software.
... CAS Navigator teacher software. 2) Go to the "Content" Tab. 3) Right-Click on the Drive that the software is trying to access and select "Remove Shortcut". 4) Close the software. 5) Re-launch the software. If the above steps do not fix the issue try the additional steps below: 1) Verify if any ...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-navigator/troubleshooting-messages-unexpected-results/34071
Solution 28890: Plotting Coordinates of a Point Using the TI-Nspire™ Family Products.
... do I plot coordinates of a point using the TI-Nspire family products? The TI-Nspire family is able to plot a set of coordinates using either the Scratchpad or Graph App. Please follow the example below to plot the coordinates (-4, 4) and (4, 4) using the Graph App. 1) Press [home]. 2) Press [c...https://education.ti.com/en/customer-support/knowledge-base/ti-nspire-family/product-usage/28890
Solution 11565: Calibrating the Vernier® Gas Pressure Sensor.
...earch How can I calibrate the gas pressure sensor? It is not required to calibrate the gas pressure sensor. Vernier® has set the sensor to match the stored calibration before shipping it. Simply use the calibration file stored in the ChemBio program. To perform a custom calibration, fo...https://education.ti.com/en/customer-support/knowledge-base/data-collection-accessories/product-usage/11565
Solution 11563: Comparison Between the CBR™ and CBR 2™.
... CBR CBR2 Range 50cm - 6m 15cm - 6m Sensitivity Switch No Yes USB for TI-84 Family Connectivity No Yes ...https://education.ti.com/en/customer-support/knowledge-base/data-collection-accessories/general-information/11563
Solution 30012: Troubleshooting Issues with a School Managed License (SML) or Concurrent License Setup.
...ave installed on the client computer. The names of some of Texas Instruments software products are very similar so you may need to verify the names match exactly as listed in the screenshot below: The name that will appear in the location in the screenshot above corresponds to the versions liste...https://education.ti.com/en/customer-support/knowledge-base/sofware-apps/computer-software-installation-activation/30012
Solution 28610: Troubleshooting the Error "The System Cannot Find the Drive Specified" When Installing TI-Nspire™ Family Version 3.0 Software From a CD
...tructions in Step 3 above with the bolded instructions for the software needed. For TI-Nspire Navigator Teacher Software, type "D:\PC\TINspireNavTchr_Setup.exe" and press enter. For TI-Nspire Teacher Software, type "D\PC\TINspireTeacher_Setup.exe" and press enter. For TI-Nspire Stude...https://education.ti.com/en/customer-support/knowledge-base/sofware-apps/computer-software-installation-activation/28610
Solution 40347: Tip Sheet for Implementation of Texas Instruments Account Based Licenses.
... record of the order and can help identify anything that may need to be corrected (start date, number of seats, License Administrator email address, etc.). 2. The License Administrator will receive the license invitation from Texas Instruments (from noreply@edtech-mail.ti.com) for the software pu...https://education.ti.com/en/customer-support/knowledge-base/sofware-apps/computer-software-installation-activation/40347
Solution 37687: TI-Innovator™ Hub BRIGHTNESS command cannot reconnect if a Light Sensor was previously connected with index number 4.
...RIGHTNESS command not reconnect if a Light Sensor was previously connected with index number 4? Please Note: This issue is fixed in version 1.1 of Sketch please update your TI-Innovator hub to resolve this issue. If you are unable to update please read the issue that exists on 1.0 below: The ske...https://education.ti.com/en/customer-support/knowledge-base/ti-innovator-technology/troubleshooting-messages-unexpected-results/37687
Solution 37685: TI-Innovator™ Hub first read of the temperature probe can result in 0 Kelvin (-273 C).
...owledge Base Search Why is the first read of the temperature probe 0 Kelvin (-273 C)? Please Note: This issue is fixed in version 1.1 of Sketch please update your TI-Innovator hub to resolve this issue. If you are unable to update please read the issue that exists on 1.0 below: If a te...https://education.ti.com/en/customer-support/knowledge-base/ti-innovator-technology/troubleshooting-messages-unexpected-results/37685
Solution 40465: Key Steps for Adding Teachers and Students to TI Account Based Software License.
...is not present please contact your email system/provider support to verify why the email was blocked. 3. Final Check a. Please send an initial batch of 10 email addresses in a csv file as a Bulk Invite. b. Please confirm the above invite notices were received. PLEASE STOP: If they did not ...https://education.ti.com/en/customer-support/knowledge-base/sofware-apps/computer-software-installation-activation/40465