Solution 11501: Resolving Error Skipping: Keyfon73.fon When Installing the TI Connect™ Software.
...TI Connect? The error Skipping: Keyfon73.fon indicates that the TI-73 key font is not properly installed on the computer. The TI Connect software requires this font prior to installation. To correct this error, follow the steps listed below: • Click on Start, Settings, Control Panel (or Start, ...https://education.ti.com/en/customer-support/knowledge-base/other-graphing/troubleshooting-messages-unexpected-results/11501
Solution 10441: Resolving ERROR 13 DIMENSION or ERROR 12 DIM MISMATCH Message on the TI-86.
...RROR 12 DIM MISMATCH is the result of one or more stat plots being selected when not using the stat plots feature of the TI-86. The following key sequence can be used to turn the stat plots off: 1) [2nd] [STAT] 2) [F3] 3) [F5] 4) [ENTER] This will turn all plots off and should allow for n...https://education.ti.com/en/customer-support/knowledge-base/other-graphing/troubleshooting-messages-unexpected-results/10441
Solution 20469: Incorrect Answer Received When Dividing Two Values in Scientific Notation Using the TI-30XS/B MultiView™ and TI-34 MultiView™ Scientific Calculators.
... TI-30XS/B MultiView and TI-34 MultiView? The TI-30XS/B MultiView and TI-34 MultiView calculators have a specific scientific notation shortcut key unique to all other scientific calculators, [x10n]. When dividing two values in scientific notation, it is necessary to put parentheses around the se...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/product-usage/20469
Solution 12711: Availability of Overhead Versions of Non-Graphing Calculators.
Solution 12711: Availability of Overhead Versions of Non-Graphing Calculators. Solution 12711: Availability of Overhead Versions of Non-Graphing Calculators. global Solution 12711: Availability of Overhead Versions of Non-Graphing Calculators. website ...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/12711
Solution 11804: The Anti-Derivative of Sin(x)*Cos(x) Returns an Expression in Cos(x) Instead of Sin(x) on the TI-89 Family, TI-92 Plus and Voyage™ 200.
...mplified. Internally, the integrand is stored as cos(x)*sin(x). TI could have chosen to store the integrand as sin(x)*cos(x), but either ordering is equally acceptable. • Then the algorithm attempts to verify whether the integrand is of the form const*elementary_function(u(x))*u'(x). Here, the ...https://education.ti.com/en/customer-support/knowledge-base/other-graphing/troubleshooting-messages-unexpected-results/11804
Solution 12685: Batteries For A Scientific Calculator.
...ONE NO TI-68 CR2032 NONE NO *The number of batteries required for the TI-30Xa Scientific Calculator will vary 1 or 2 lithium batteries. Note: The "A76" battery replaces the "LR44" Solution 12685: Batte...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/12685
Solution 22310: Correcting the Error Message Variable is Locked, Protected, or Archived on the TI-89 Family, TI-92 Family and Voyage™ 200.
...mily and Voyage 200 graphing calculator? The error, Variable is Locked, Protected, or Archived, appears when attempting to delete a locked program, equation, list, etc. from the var-link menu using a TI-89 family, TI-92 family or Voyage 200 calculator. Since the item to be deleted is locked, th...https://education.ti.com/en/customer-support/knowledge-base/other-graphing/troubleshooting-messages-unexpected-results/22310
Solution 16409: Correcting a TI-89 Family, TI-92 Family, or Voyage™ 200 Graphing Calculator That is Locked Displaying "Busy" for a Prolonged Period of Time.
...TI-89 family, TI-92 family or Voyage 200 graphing calculators may display "busy" for a certain time while processing complex computations or solving equations. However, if the calculator displays busy for more than 10 minutes please see the below instructions: NOTE: The following procedures will ...https://education.ti.com/en/customer-support/knowledge-base/other-graphing/troubleshooting-messages-unexpected-results/16409
Solution 31772: Performing One-Variable Statistics on the TI-34 MultiView™ and TI-30XS MultiView Calculators.
...r L1 by pressing [enter] after each point. 3) Press [2nd] [stat] and select '1:1-Var Stats'. 4) Select 'L1' next to DATA and select 'ONE' next to FRQ. 5) Press the down arrow until 'CALC' is highlighted on the bottom right of the screen and press [enter]. Answers should be as follows: n = 5 x ...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/product-usage/31772
Solution 12258: Differences Between the TI-30Xa and the TI-30X IIS/B.
...I-30X IIS/B? The TI-30X IIS/B have the features of the TI-30Xa, and also includes two lines (top line is entry line and bottom line is answer line), equation recall/edit feature, two variable statistics, memory retention feature (retains previous entries, memory values, and individual statistical...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/12258
Solution 12257: Differences Between the TI-30X IIB And the TI-30X IIS.
Solution 12257: Differences Between the TI-30X IIB And the TI-30X IIS. Solution 12257: Differences Between the TI-30X IIB And the TI-30X IIS. global Solution 12257: Differences Between the TI-30X IIB And the TI-30X IIS. website ...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/12257
Solution 11845: Resolving the Error Message "Illegal Instruction" on the TI-89 Family, TI-92 Family, and Voyage™ 200 Graphing Calculators.
... does not restore the unit, remove a battery and press [ON] for 30 seconds. Replace the battery, turn on the unit, and adjust the contrast. If you require additional assistance please contact TI-Cares. Solution 11845: Resolving the Error Message "Illegal Instruction" on the TI-89 Family, TI-92 ...https://education.ti.com/en/customer-support/knowledge-base/other-graphing/troubleshooting-messages-unexpected-results/11845
Solution 12229: Differences Between the TI-10 and TI-15 Explorer™.
...ifferences were necessary to make it grade appropriate. The TI-10 has fewer and larger keys. The keys for fractions, the [0.001] thousandths key, p, square root, [^] caret, and % have been omitted from the TI-10. The unit has only one operation key as opposed to two on the TI-15 Explorer. Separa...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/12229
Solution 35615: Replacing the Battery in a TI-36X Pro Scientific Calculator.
...3) From the bottom, carefully separate the front from the back. Be careful not to damage any of the internal parts. 4) With a small screwdriver (if required), remove the battery. 5) To replace the battery, check the polarity (+ and -) and slide in a new battery. Press firmly to snap the new batte...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/35615
Solution 40317: TI-30XS MultiView and TI-34 MultiView Scientific calculator battery information
... From the bottom, carefully separate the front from the back. Be careful not to damage any of the internal parts. With a small screwdriver (if required), remove the battery. To replace the battery, check the polarity (+ and -) and slide in a new battery. Press firmly to snap the new ba...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/general-information/40317
Solution 12280: Calculating Standard Deviation on the TI-30X IIS/B, TI-30XS MultiView™ and TI-34 II Explorer Plus™.
...type the value and press [ENTER]. Press the down arrow key to move on to the next data point. Data points alternate between the x value, and the x frequency. 3) [STATVAR] displays the menu of variables with their current values. Answers should be as follows: Sx (Sample Standard Deviation) = 1 s...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/product-usage/12280
Solution 12282: Changing the Angle Mode Setting on the TI-34 II Explorer Plus™.
...entific, elementary & basic calculators Knowledge Base Knowledge Base Search How do I change the angle mode setting from degrees to radians on the TI-34 II Explorer Plus? Use the following steps to change the angle mode setting on theTI-34 II Explorer Plus: 1) Press [...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/product-usage/12282
Solution 34692: Using the Statistics Wizard on the TI-84 Plus Family of Graphing Calculators.
... statistics wizard format on the TI-84 Plus family of graphing calculators? The TI-84 Plus family of graphing calculators allows entering statistics equations, in a wizard format making entering the information more intuitive. To enable and disable the wizard format by going to [Mode] and chang...https://education.ti.com/en/customer-support/knowledge-base/ti-83-84-plus-family/product-usage/34692
Solution 34611: Computing One Way Analysis of Variance (ANOVA) on the TI-83 Plus and TI-84 Plus Family of Graphing Calculators.
... completely randomized design is used. A robotic golfer, using a driver, is set up to hit a random sample of 24 balls (8 of each brand) in a random sequence follow the steps below: 1) Press [stat] [5] [enter] to restore default lists 2) Press [stat] [4] [2nd] [1] [,] [2nd] [2] [,] [2nd] [3] [ent...https://education.ti.com/en/customer-support/knowledge-base/ti-83-84-plus-family/product-usage/34611
Solution 10687: Differences in the TI-30X and TI-30Xa.
... TI-30X and TI-30Xa? The key difference between the TI-30X and TI-30Xa is that the TI-30Xa does not automatically use the [=] key as a constant. As requested by educators, it has a [k] key that will turn on the [=] key to be used as a constant. When the [k] key is selected a [k] will appear in th...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/product-usage/10687
Solution 10688: Replacing the Batteries In a TI-30Xa.
...ase Knowledge Base Search How can the batteries in a TI-30Xa Scientific Calculator be replaced? The number of batteries required for the TI-30Xa Scientific Calculator will vary (1 or 2 lithium batteries), please check the back of the calculator to verify how many batte...https://education.ti.com/en/customer-support/knowledge-base/scientific-elem-calculators/product-usage/10688
Solution 34602: Graphing a Step Function on the TI-83 Plus and TI-84 Plus Family of Graphing Calculators.
...e Search How can I graph a step function on the TI-83 Plus and TI-84 Plus family of graphing calculators? A step function (for example, the greatest integer function) can be graphed by using the int( command. The example below will demonstrate how to graph a step function. Example: Grap...https://education.ti.com/en/customer-support/knowledge-base/ti-83-84-plus-family/product-usage/34602
Solution 34597: Shortcuts for Working with Menus on the TI-83 Plus and TI-84 Plus Family of Graphing Calculators.
...ssing the [APPS] key will jump the user to the "B" section of the CATALOG. • Use the number keys printed in front of certain functions to access them quickly rather than scrolling down to the function, highlighting it, and pressing [ENTER]. For example, try accessing the convert to fraction comma...https://education.ti.com/en/customer-support/knowledge-base/ti-83-84-plus-family/product-usage/34597
Solution 34595: Calculating the Inverse Log of a Number on the TI-83 Plus and TI-84 Plus Family of Graphing Calculators.
...nverse log of a number on the TI-83 Plus and TI-84 Plus family of graphing calculators, follow the example below. The inverse log of a number (N) is equal to 10N. Example: Calculate the inverse log of .5 • Press [2nd] [10x]. • Input .5 and press [ENTER] to complete the calculation. Please se...https://education.ti.com/en/customer-support/knowledge-base/ti-83-84-plus-family/product-usage/34595
Solution 34731: Using the Mean() Function on the TI-83 Plus and TI-84 Plus Family of Graphing Calculators.
...e mean() function on the TI-83 Plus and TI-84 Plus family of graphing calculators? The syntax for the mean() function is listed below. mean(list[,freqlist]) The mean() function return the mean or average of list with the frequency list (freqlist). If a freqlist is not specified in the mean() fu...https://education.ti.com/en/customer-support/knowledge-base/ti-83-84-plus-family/product-usage/34731